CD Skripsi

Prarancangan Pabrik Hdpe Proses Cx-Mitsui Dengan Desain Alat Utama Flash Drum (Fd-301)

---

ABSTRACT
High density polyethylene or high density polyethylene is one type of high-density polymer that is flexible, impact resistant, low temperature resistant, even freeze water resistant which is potential as a matrix candidate in making bone replacement composites. One process that can be used in synthesizing high density polyethylene is the CX-Mitsui process. CX-Mitsui processes there is a reaction process and separation process to obtain HDPE products. The design of a high density polyethylene (HDPE) plant from ethylene with the Cx-Misui process requires a separator device, namely a flash drum to separate gases (ethylene, acetylene, 1-butene, hydrogen, nitrogen, methane, and hexane) with solids (titanium tetra chloride, hexane and polyethylene) output from reactor 2 based on differences in boiling point components and volatility. Economic analysis of this HDPE plant is obtained as follows, Return on Investment (ROI) of 16.33%, payback period (PBP) for 4 years 1 month, IRR of 23.16%, break Event Point of 60%, shut down point (SDP) of 15.1%. Based on the results obtained, it can be concluded that the pre-design of the High-Density Polyethylene (HDPE) plant from ethylene with the design of the main flash drum tool (FD-301) with a capacity of 125,000 tons / year is feasible to proceed to the planning stage. Keywords : Economic analysis, Flash drum, HDPE

---

Ketersediaan

Informasi Detail

Judul Seri

-

No. Panggil

1707113709

Penerbit

Pekanbaru : Universitas Riau – Fakultas Teknik – Teknik Kimia., 2023

Deskripsi Fisik

-

Bahasa

Indonesia

ISBN/ISSN

-

Klasifikasi

1707113709

Tipe Isi

-

Tipe Media

-

Tipe Pembawa

-

Edisi

-

Subjek

TEKNIK KIMIA

Info Detail Spesifik

-

Pernyataan Tanggungjawab

DAUS

Versi lain/terkait

Lampiran Berkas

Komentar

---

Anda harus masuk sebelum memberikan komentar