Digilib Perpustakaan Universitas Riau

Tugas Akhir, Skripsi, Tesis dan Disertasi Mahasiswa Universitas Riau

  • Beranda
  • Informasi
  • Berita
  • Bantuan
  • Pustakawan
  • Pilih Bahasa :
    Bahasa Arab Bahasa Bengal Bahasa Brazil Portugis Bahasa Inggris Bahasa Spanyol Bahasa Jerman Bahasa Indonesia Bahasa Jepang Bahasa Melayu Bahasa Persia Bahasa Rusia Bahasa Thailand Bahasa Turki Bahasa Urdu

Pencarian berdasarkan :

SEMUA Pengarang Subjek ISBN/ISSN Pencarian Spesifik

Pencarian terakhir:

{{tmpObj[k].text}}
Image of Rancang Bangun Kompor Gas Cerdas Berbasis Internet Of Things (Iot) Menggunakan Aplikasi Blynk
Penanda Bagikan

CD Skripsi

Rancang Bangun Kompor Gas Cerdas Berbasis Internet Of Things (Iot) Menggunakan Aplikasi Blynk

MICHAEL EVANS DOLOKSARIBU / 1807113249 - Nama Orang;

ABSTRACT
Gas stoves are a type of stove commonly used by the Indonesian community for cooking. However, using gas stoves is associated with risks, such as explosions or fires, if not used cautiously. To address these issues, this thesis designs a system that can monitor and control gas stoves based on the Internet of Things (IoT). The design utilizes several sensors: the MQ-2 sensor as a gas leakage detector, the PIR sensor as a user activity detector when the stove is turned on, and the Flame sensor as an ignition flame detector. In addition to these sensors, the circuit is designed with a servo motor for manual or automatic stove shutdown control. Furthermore, a buzzer is used to warn about gas leakage from the gas cylinder. The sensor data is transmitted from the NodeMCU ESP32 to the Blynk application for monitoring and control. The testing results demonstrate that the device can monitor and control the gas stoves. The average voltage measurement of the MQ-2 sensor under normal conditions is 1.85 volts, and during gas leakage, it is 2.37 volts. The average voltage measurement of the Flame sensor under normal conditions is 0.19 volts, and when the stove is ignited, it is 3.08 volts. The average voltage measurement of the PIR sensor under normal conditions is 0.024 volts, and when there is user activity on the stove, it is 3.28 volts. The average data delivery delay to Blynk is 0.15 seconds. The automatic stove shutdown testing showed an average delay of 5 seconds. The control of stove shutdown through the Blynk application has an average time difference of 1.54 seconds.
xi
Keywords: Gas stove, Buzzer, IoT, MQ-2 sensor, PIR sensor, Flame sensor, NodeMCU ESP32, Blynk, delay.


Ketersediaan
#
Perpustakaan Universitas Riau 1807113249
1807113249
Tersedia
Informasi Detail
Judul Seri
-
No. Panggil
1807113249
Penerbit
Pekanbaru : Universitas Riau – Fakultas Teknik – Teknik Elektro., 2023
Deskripsi Fisik
-
Bahasa
Indonesia
ISBN/ISSN
-
Klasifikasi
1807113249
Tipe Isi
-
Tipe Media
-
Tipe Pembawa
-
Edisi
-
Subjek
TEKNIK ELEKTRO
Info Detail Spesifik
-
Pernyataan Tanggungjawab
DAUS
Versi lain/terkait

Tidak tersedia versi lain

Lampiran Berkas
  • COVER
  • DAFTAR ISI
  • ABSTRAK
  • BAB I PENDAHULUAN
  • BAB II TINJAUAN PUSTAKA
  • BAB III METODE PENELITIAN
  • BAB IV HASIL DAN PEMBAHASAN
  • BAB V KESIMPULAN DAN SARAN
  • DAFTAR PUSTAKA
  • DAFTAR PUSTAKA
  • LAMPIRAN
Komentar

Anda harus masuk sebelum memberikan komentar

Digilib Perpustakaan Universitas Riau
  • Informasi
  • Layanan
  • Pustakawan
  • Area Anggota

Tentang Kami

As a complete Library Management System, SLiMS (Senayan Library Management System) has many features that will help libraries and librarians to do their job easily and quickly. Follow this link to show some features provided by SLiMS.

Cari

masukkan satu atau lebih kata kunci dari judul, pengarang, atau subjek

Donasi untuk SLiMS Kontribusi untuk SLiMS?

© 2025 — Senayan Developer Community

Ditenagai oleh SLiMS
Pilih subjek yang menarik bagi Anda
  • Karya Umum
  • Filsafat
  • Agama
  • Ilmu-ilmu Sosial
  • Bahasa
  • Ilmu-ilmu Murni
  • Ilmu-ilmu Terapan
  • Kesenian, Hiburan, dan Olahraga
  • Kesusastraan
  • Geografi dan Sejarah
Icons made by Freepik from www.flaticon.com
Pencarian Spesifik
Kemana ingin Anda bagikan?