CD Skripsi

Pengaruh Kecepatan Sliding Vertical Terhadap Hasil Pengelasan Material Karbon Rendah Menggunakan Proses Pengelasan Smaw Sistem Sliding Adaptive Vertical

---

Electric arc welding wrapped electrodes or known as SMAW (Shielded Metal Arc Welding) is one of the welding technologies which have several advantages such as large currents that can be varied as a heat source, and easy to use in various welding positions. In order to get good welding, the angle and speed of welding must be concerned. This study uses a sliding adaptive vertical system that varies the vertical sliding velocity against welding angle and current. Observation was done by observing visually and mechanical properties was tested by a tensile test. The material used low steel (mild steel), the seam used V steam with angle 60 ° and the electrode used the E6013 KOBE RB-26 electrode with 3.2 mm diameter. This study used 9 specimens with the lowest tensile strength of 468.11 Mpa and the highest value is 496.53 Mpa. Micro structure is influenced by several factors such as heat input, cooling rate, weld speed, and current strength. In this study the weld metal area has a small grain structure than base metal and HAZ (Heat affected zone).

Keywords: smaw welding, sliding adaptive vertical, electrode angle, HAZ

---

Ketersediaan

Informasi Detail

Judul Seri

-

No. Panggil

07 03. 119 (0031)

Penerbit

Pekanbaru : Universitas Riau – Fakultas Teknik – Teknik Mesin., 2019

Deskripsi Fisik

vi, 71 hlm.; ill.; 29 cm

Bahasa

Indonesia

ISBN/ISSN

-

Klasifikasi

07 03. 119 (0031)

Tipe Isi

-

Tipe Media

-

Tipe Pembawa

-

Edisi

-

Subjek

MESIN

Info Detail Spesifik

-

Pernyataan Tanggungjawab

DAUS

Versi lain/terkait

Lampiran Berkas

Komentar

---

Anda harus masuk sebelum memberikan komentar