Digilib Perpustakaan Universitas Riau

Tugas Akhir, Skripsi, Tesis dan Disertasi Mahasiswa Universitas Riau

  • Beranda
  • Informasi
  • Berita
  • Bantuan
  • Pustakawan
  • Pilih Bahasa :
    Bahasa Arab Bahasa Bengal Bahasa Brazil Portugis Bahasa Inggris Bahasa Spanyol Bahasa Jerman Bahasa Indonesia Bahasa Jepang Bahasa Melayu Bahasa Persia Bahasa Rusia Bahasa Thailand Bahasa Turki Bahasa Urdu

Pencarian berdasarkan :

SEMUA Pengarang Subjek ISBN/ISSN Pencarian Spesifik

Pencarian terakhir:

{{tmpObj[k].text}}
Image of Penentuan Nilai Suseptibilitas Magnetik Dan Komposisi Serta Ukuran Partikel Oksida Besi Pasir Alam Sungai Rokan Dipreparasi Ball Milling
Penanda Bagikan

CD Skripsi

Penentuan Nilai Suseptibilitas Magnetik Dan Komposisi Serta Ukuran Partikel Oksida Besi Pasir Alam Sungai Rokan Dipreparasi Ball Milling

ELFITAH RAMADHANI TRIANA / 1903112420 - Nama Orang;

ABSTRACT
The value of magnetic susceptibility and variation of composition and size of iron oxide particles from natural sand collected from Rokan River Riau Province have been investigated by ball milling. Before going through the ball milling process, the magnetic and non-magnetic particles of the sample were separated using an Iron Sand Separator and a Neodynium Iron Boron (NdFeb) magnet. A sample of 120 grams was taken and prepared with the first stage of ball milling for 80 hours, namely BM 1. Then, product of BM 1 in the second stage of ball milling with additional time of 30 hours, 40 hours and 50 hours and each of these products products named BM 2A, BM 2B and BM 2C. The milled balls used were combined iron balls with a diameter of 2 cm as many as 16 pieces, 1.5 cm as many as 32 pieces and 0.7 cm as many as 64 pieces. The results showed that the value of magnetic susceptibility increased with increasing ball milling rotation time, namely from 11361.6 in BM 1, to 12398.7 in BM 2A, 13383.4 in BM 2B; and 14541.2 on BM 2C. Likewise with the test results using X-Ray Fluorescence which showed that the magnetic element, namely Fe, experienced an increase in the proportion from 38.113% for BM 1 to 40.133% for BM 2A, 41.629% for BM 2B and 42.478% for BM 2C. The test results using a Scanning Electron Microscope showed that the average sample particle size decreased from 685 nm to 656 nm; 630 nm; and 630 nm as the milling time increases.
Keywords: sand, ball milling, magnetic susceptibility


Ketersediaan
#
Perpustakaan Universitas Riau 1903112420
1903112420
Tersedia
Informasi Detail
Judul Seri
-
No. Panggil
1903112420
Penerbit
Pekanbaru : Universitas Riau - FMIPA -Fisika., 2023
Deskripsi Fisik
-
Bahasa
Indonesia
ISBN/ISSN
-
Klasifikasi
1903112420
Tipe Isi
-
Tipe Media
-
Tipe Pembawa
-
Edisi
-
Subjek
FISIKA
Info Detail Spesifik
-
Pernyataan Tanggungjawab
tethi
Versi lain/terkait

Tidak tersedia versi lain

Lampiran Berkas
  • JUDUL
  • DAFTAR ISI
  • ABSTRAK
  • BAB I PENDAHULUAN
  • BAB II TINJAUAN PUSTAKA
  • BAB III METODE PENELITIAN
  • BAB IV HASIL DAN PEMBAHASAN
  • BAB V PENUTUP
  • DAFTAR PUSTAKA
  • LAMPIRAN
Komentar

Anda harus masuk sebelum memberikan komentar

Digilib Perpustakaan Universitas Riau
  • Informasi
  • Layanan
  • Pustakawan
  • Area Anggota

Tentang Kami

As a complete Library Management System, SLiMS (Senayan Library Management System) has many features that will help libraries and librarians to do their job easily and quickly. Follow this link to show some features provided by SLiMS.

Cari

masukkan satu atau lebih kata kunci dari judul, pengarang, atau subjek

Donasi untuk SLiMS Kontribusi untuk SLiMS?

© 2025 — Senayan Developer Community

Ditenagai oleh SLiMS
Pilih subjek yang menarik bagi Anda
  • Karya Umum
  • Filsafat
  • Agama
  • Ilmu-ilmu Sosial
  • Bahasa
  • Ilmu-ilmu Murni
  • Ilmu-ilmu Terapan
  • Kesenian, Hiburan, dan Olahraga
  • Kesusastraan
  • Geografi dan Sejarah
Icons made by Freepik from www.flaticon.com
Pencarian Spesifik
Kemana ingin Anda bagikan?