Digilib Perpustakaan Universitas Riau

Tugas Akhir, Skripsi, Tesis dan Disertasi Mahasiswa Universitas Riau

  • Beranda
  • Informasi
  • Berita
  • Bantuan
  • Pustakawan
  • Pilih Bahasa :
    Bahasa Arab Bahasa Bengal Bahasa Brazil Portugis Bahasa Inggris Bahasa Spanyol Bahasa Jerman Bahasa Indonesia Bahasa Jepang Bahasa Melayu Bahasa Persia Bahasa Rusia Bahasa Thailand Bahasa Turki Bahasa Urdu

Pencarian berdasarkan :

SEMUA Pengarang Subjek ISBN/ISSN Pencarian Spesifik

Pencarian terakhir:

{{tmpObj[k].text}}
Image of Pengaruh Variasi Kecepatan Pembebanan Aksial Terhadap Nilai Kuat Tekan Beton Fc’ 20.75 Mpa
Penanda Bagikan

CD Tugas Akhir

Pengaruh Variasi Kecepatan Pembebanan Aksial Terhadap Nilai Kuat Tekan Beton Fc’ 20.75 Mpa

REZA RESTU ANANDA / 1907035269 - Nama Orang;

ABSTRACT
In general, the compressive strength of concrete is influenced by the composition of the concrete, but it turns out that it is not only influenced by the composition of the concrete, but also by the speed of loading. The effect of variations in axial loading speed on concrete compressive strength value fc' 20.75 MPa will be tested in this study. This test aims to determine the effect of variations in axial loading speed on the compressive strength of concrete and the resulting ratio to variations in standard loading speed (15 MPa/minute). Measurement of axial loading speed using a stopwatch and video recording. Based on ASTM C 39/C 39M-05 for a 15/30 cylindrical specimen the standard loading speed is 0.25 ± 0.05 MPa/second. This study used seven variations of axial loading speed, namely 3 MPa/minute, 5 MPa/minute, 10 MPa/minute, 15 MPa/minute, 20 MPa/minute, 25 MPa/minute and 30 MPa/minute. For each variation of loading speed, there are three cylindrical concrete specimens with a diameter of 15cm and a height of 30cm. The results showed that the greater the axial loading speed, the greater the resulting compressive strength. The ratio of the resulting compressive strength values at the loading speed variations under the standard variation (15 MPa/minute) has a greater ratio or a more significant effect on the concrete compressive strength value compared to the above standard loading speed variations.
Keywords : Concrete, Loading Speed, Axial Loading, Compressive Strength.


Ketersediaan
#
Perpustakaan Universitas Riau 1907035269
1907035269
Tersedia
Informasi Detail
Judul Seri
-
No. Panggil
1907035269
Penerbit
Pekanbaru : Universitas Riau – Fakultas Teknik – Teknik Sipil., 2022
Deskripsi Fisik
-
Bahasa
Indonesia
ISBN/ISSN
-
Klasifikasi
1907035269
Tipe Isi
-
Tipe Media
-
Tipe Pembawa
-
Edisi
-
Subjek
TEKNIK SIPIL
Info Detail Spesifik
-
Pernyataan Tanggungjawab
DAUS
Versi lain/terkait

Tidak tersedia versi lain

Lampiran Berkas
  • COVER
  • DAFTAR ISI
  • ABSTRAK
  • BAB I PENDAHULUAN
  • BAB II TINJAUAN PUSTAKA
  • BAB III METODE PENELITIAN
  • BAB IV HASIL DAN PEMBAHASAN
  • BAB V KESIMPULAN DAN SARAN
  • DAFTAR PUSTAKA
  • LAMPIRAN
Komentar

Anda harus masuk sebelum memberikan komentar

Digilib Perpustakaan Universitas Riau
  • Informasi
  • Layanan
  • Pustakawan
  • Area Anggota

Tentang Kami

As a complete Library Management System, SLiMS (Senayan Library Management System) has many features that will help libraries and librarians to do their job easily and quickly. Follow this link to show some features provided by SLiMS.

Cari

masukkan satu atau lebih kata kunci dari judul, pengarang, atau subjek

Donasi untuk SLiMS Kontribusi untuk SLiMS?

© 2025 — Senayan Developer Community

Ditenagai oleh SLiMS
Pilih subjek yang menarik bagi Anda
  • Karya Umum
  • Filsafat
  • Agama
  • Ilmu-ilmu Sosial
  • Bahasa
  • Ilmu-ilmu Murni
  • Ilmu-ilmu Terapan
  • Kesenian, Hiburan, dan Olahraga
  • Kesusastraan
  • Geografi dan Sejarah
Icons made by Freepik from www.flaticon.com
Pencarian Spesifik
Kemana ingin Anda bagikan?