CD Skripsi

Studi Pemanfaatan Limbah Kaca Dan Piston Bekas Sebagai Material Alternatif Kanvas Rem Sepeda Motor Dengan Menggunakan Metode Metalurgi Serbuk

---

Waste glass and piston can be used as alternative material to non-asbestos motorcycle brake pads based on their properties. Waste glass used as a reinforce, the piston used as a filler, and phenolic resin used as a binder. Those materials were mechanically transformed into powder with 60,100, and 60 mesh respectively. The glass, piston, and phenolic resins powder were varied into five different compositions which are A (10% glass, 50% piston, 40% phenolic resin), B (20% glass, 40% piston, 40% phenolic resin), C (30% glass, 30% piston, 40% phenolic resin), D (40% glass, 20% piston, 40% phenolic resin), E (50% glass, 10% piston, 40% phenolic resin). The powder was mixed at 45 rpm for 30 minutes, then 166 Bar initial pressure was applied in single action for 2 minutes, next it was pressed at 196 Bar in single action hot compacting at 150° for 5 minutes holding time. The green bodies were sintered at 150°C for 4 hours, finally those samples were evaluated by hardness test and wear test. The results show, the composition A has the closest hardness and wear value to commercial products, 40.549 HVN and 8.826x10-12 m3/m accordingly.
Keywords: Brake Pads, Waste Glass, Waste Piston

---

Ketersediaan

Informasi Detail

Judul Seri

-

No. Panggil

07 03. 116 (0015)

Penerbit

Pekanbaru : Universitas Riau - Fakultas Teknik - Teknik Mesin S 1., 2016

Deskripsi Fisik

xvi, 66 hlm.: ill.; 29 cm

Bahasa

Indonesia

ISBN/ISSN

-

Klasifikasi

07 03. 116 (0015)

Tipe Isi

-

Tipe Media

-

Tipe Pembawa

-

Edisi

-

Subjek

MESIN

Info Detail Spesifik

-

Pernyataan Tanggungjawab

DAUS

Versi lain/terkait

Lampiran Berkas

Komentar

---

Anda harus masuk sebelum memberikan komentar