CD Skripsi

Kualitas Papan Partikel Dari Limbah Tandan Kosong Kelapa Sawit Dengan Perekat Damar

---

ABSTRACT
Oil palm empty bunches are one of the solid wastes from the processing of
fresh fruit bunches that have not been used optimally. This study aims to obtain
the best concentration of resin adhesives in the manufacture of particleboard from
oil palm empty fruit bunches. The research was conducted experimentally using a
completely randomized design (CRD) with 5 treatments and 3 replications in
order to obtain 15 experimental units with a particle size of 16 mesh of oil palm
empty bunches. Treatment of oil palm empty bunches with adhesive is 90%:
10%, 88%: 12%, 86%: 14%, 84%: 16%, 82%: 18%. The data obtained were
analyzed statistically using Analysis of Variance (ANOVA) and Duncan New
Multiple Range Test (DNMRT) at the 5% level. The results showed that the
composition of the empty fruit bunches of oil palm and resin adhesive
significantly affected the density, water absorption, thickness expansion, elasticity
modulus, and fracture modulus, but had no significant effect on moisture content.
The best treatment chosen was treatment P5 with a density value of 0.85 g/cm3,
water content of 5.81%, water absorption 61%, thickness development 53.33%,
modulus of elasticity 1.607.46 kgf/cm2, modulus of fracture 14.52 kgf/cm2.
Keywords: Particle board, oil palm empty bunches, resin adhesive

---

Ketersediaan

Informasi Detail

Judul Seri

-

No. Panggil

06 03. 121 (0012)

Penerbit

Pekanbaru : Universitas Riau – Fakultas Pertanian –Teknologi Pertanian., 2021

Deskripsi Fisik

ix, 79 hlm.; ill.: 29 cm

Bahasa

Indonesia

ISBN/ISSN

-

Klasifikasi

06 03. 121 (0012)

Tipe Isi

-

Tipe Media

-

Tipe Pembawa

-

Edisi

-

Subjek

TEKNOLOGI PERTANIAN

Info Detail Spesifik

-

Pernyataan Tanggungjawab

Daus

Versi lain/terkait

Lampiran Berkas

Komentar

---

Anda harus masuk sebelum memberikan komentar