CD Tugas Akhir

Pembuatan Produk Karet Busa Berbasis Lateks Karet Alam Dengan Filler Serabut Kelapa

---

ABSTRACT
The characteristics of rubber foam are influenced by various parameters, including tensile strenght and density. The purpose of this study was to make and determine the characteristics of foam rubber products based on natural rubber latex with coconut fiber filler. The manufacture of rubber foam is carried out in several stages, namely the process of making latex and mixing of additives (such as zinc oxide, MBTS, stearic acid, sulfur and sodium bicarbonate) and the vulcanization process. Vulcanization was carried out at 100oC, 110oC, 120oC and 130oC for 60 minutes. Parameters tested include tensile strength, elongation, Young's modulus, and specific gravity. The results of this study indicated that the best results were obtained at 100oC, with a tensile strength of 25 N/cm2, an elongation of 109.3%, a Young's modulus of 1 N/cm2 and a density of 0.93 gr/cm3.
Keywords: latex, sulfur, vulcanization, tensile strenght, density

---

Ketersediaan

Informasi Detail

Judul Seri

-

No. Panggil

1907036390

Penerbit

Pekanbaru : Universitas Riau – Fakultas Teknik – Teknik Kimia., 2022

Deskripsi Fisik

-

Bahasa

Indonesia

ISBN/ISSN

-

Klasifikasi

1907036390

Tipe Isi

-

Tipe Media

-

Tipe Pembawa

-

Edisi

-

Subjek

TEKNIK KIMIA

Info Detail Spesifik

-

Pernyataan Tanggungjawab

DAUS

Versi lain/terkait

Lampiran Berkas

Komentar

---

Anda harus masuk sebelum memberikan komentar