CD Skripsi

Pengaruh Laju Alir Dan Tegangan Pada Pengolahan Limbah Cair Pabrik Kelapa Sawit Dari Kolam Fakultatif Dengan Metode Reaktor Elektrik Kontinu

---

ABSTRACT
Palm oil mill effluent continues to grow along with palm oil production in
Indonesia. Palm oil mill effluent treatment has been using anaerobic ponds which
are not efficient due to the require large areas of land and due to greenhouse
gases because they produce CO2. Electrocoagulation is an alternative technology
and advanced technology in treating palm oil mill effluent. Electrocoagulation is
a method of coagulation using direct current through the electrochemical process.
This research discusses the variation of voltage and flow rate using reactor
methods with pollutant parameters such as biological chemical demand, chemical
oxygen demand, total suspended solids and acidity (pH). The type of electrodes
used is aluminum with voltage variations of 5, 7 and 9 volts and flow rate
variations of 3,36; 4,32; and 7,5 L/hour. The sample used came from facultative
pond in PTPN V Sei Galuh, Riau. The results obtained by the highest percentage
of reduction in BOD were 84.76%; COD of 83.38%; TSS of 88.73% at a voltage
of 9 volts and a flow rate of 3,36 L/hour. The results of this research are in
accordance with the standard quality standards for palm oil mill effluent in the
Minister of Environment Regulation number 5 of 2014.
Keywords: BOD, COD, electrocoagulation, TSS, pH.

---

Ketersediaan

Informasi Detail

Judul Seri

-

No. Panggil

07 02. 120 (0019)

Penerbit

Pekanbaru : Universitas Riau – Fakultas Teknik – Teknik Kimia., 2020

Deskripsi Fisik

xii, 29 hlm.; ill.: 29 cm

Bahasa

Indonesia

ISBN/ISSN

-

Klasifikasi

07 02. 120 (0019)

Tipe Isi

-

Tipe Media

-

Tipe Pembawa

-

Edisi

-

Subjek

TEKNIK KIMIA

Info Detail Spesifik

-

Pernyataan Tanggungjawab

Daus

Versi lain/terkait

Lampiran Berkas

Komentar

---

Anda harus masuk sebelum memberikan komentar