CD Skripsi

Analisis Distribusi Parameter Fisis Air Bawah Tanah Pada Perumahan Di Sekitar Kawasan Pabrik Karet PT. RICRY Kecamatan Rumbai Pesisir Kota Pekanbaru

---

Distribution for the physical parameters of ground water analysis in the housing around the PT. RICRY Pekanbaru rubber factory has been already got through by using gridding method at 400 m about around the rubber factory. The physical parameters level of ground water includes are conductivity, resistivity, and salinity that measured by coordinate points as much as 5 points. The physical parameters level of ground water data recorded were input into software "surfer 11" then to be processed in order to obtain a map of contour levels of physical parameters of ground water. This research shows that the highest level of conductivity is originated from the type of ring wells with the value of 0,0270 (ohm.m)-1 exceeding the threshold of ground water quality, and the lowest level of conductivity is 0.0145 (ohm.m)-1 comes from the borehole. The lowest resistivity level is 37.0370 (ohm.m) obtained from the ring wells and the highest of 68.965 (ohm.m) from the borehole. The highest salinity level is 1.5 gr/l exceeding the ground water quality from ring wells and the lowest level is 0.5 gr/l obtained from the borehole. The ground water on ring wells generally has been polluted by waste of rubber factory.
Keywords : Conductivity, resistivity, salinity, waste rubber, groundwater

---

Ketersediaan

Informasi Detail

Judul Seri

-

No. Panggil

03 01. 116 (0090)

Penerbit

Pekanbaru : Universitas Riau - FMIPA - Fisika., 2016

Deskripsi Fisik

xvi, 46 hlm.: ill.: 29 cm

Bahasa

Indonesia

ISBN/ISSN

-

Klasifikasi

03 01. 116 (0090)

Tipe Isi

-

Tipe Media

-

Tipe Pembawa

-

Edisi

-

Subjek

FISIKA

Info Detail Spesifik

-

Pernyataan Tanggungjawab

Dewa

Versi lain/terkait

Lampiran Berkas

Komentar

---

Anda harus masuk sebelum memberikan komentar