CD Skripsi

Simulasi Perancangan Konverter Dc-Dc Sepic Yang Dimodifikasi Dengan Kopel Induktor

---

ABSTRACT
The direct voltage generated by DC sources, both solar cells and storage
components such as batteries, is generally relatively low. For that we need a DCDC
converter to increase the voltage level. The addition of an inductor coupling
to the SEPIC DC-DC converter can be used to produce a high gain ratio to the
converter output voltage. The inductor coupling increases the voltage
proportional to the ratio of the primary to secondary windings in the coupling
inductor. This converter is capable of producing a static voltage gain with a ratio
up to 28 times. The converter modeling circuit was built and simulated using
MATLAB-SIMULINK 2016a software. In the SEPIC DC-DC converter simulation
with a modified inductor coupling, it can produce an output voltage of 250 V, 300
V and 350 V at different inductor coupling winding ratios with the same duty
cycle value of 0.83 and 400 V at a winding ratio n is 3 and duty-cycle equal to
0.85
.
Keywords: SEPIC Converter, coupling inductor, high gain ratio

---

Ketersediaan

Informasi Detail

Judul Seri

-

No. Panggil

07 04. 121 (0014)

Penerbit

Pekanbaru : Universitas Riau – Fakultas Teknik – Teknik Elektro., 2021

Deskripsi Fisik

ix, 79 hlm.; ill.: 29 cm

Bahasa

Indonesia

ISBN/ISSN

-

Klasifikasi

07 04. 121 (0014)

Tipe Isi

-

Tipe Media

-

Tipe Pembawa

-

Edisi

-

Subjek

TEKNIK ELEKTRO

Info Detail Spesifik

-

Pernyataan Tanggungjawab

Daus

Versi lain/terkait

Lampiran Berkas

Komentar

---

Anda harus masuk sebelum memberikan komentar