CD Skripsi

Pengembangan Desain Pelindung Kaca Samping Anoa 2 6x6 Produksi Pt. Pindad Berdasarkan Kontrol Otomatis

---

ABSTRACT
The Anoa 2 6x6 vehicle has a shothole cover component at the bottom of the plate which is used as a firing area. When plates are used, two people are required to operate them, as plate holders and shooters. If operated by one person, it can reduce the accuracy of shots from inside the vehicle because the concentration is divided between shooting and shooting. the other hand is used to hold the lever. In Indonesian military standards, the standard weapon used is a light machine gun with a weight of 12 kg and a weapon length of 800-1100 mm with a recoil power of 0.8 kg and a firepower of 4-6 kg. This tool uses Arduino ATmega 328 as a microcontroller with a switch as input. The new plate and the old plate weigh 4.58 and 4.32 kg, so the pneumatic diameter is 8.4 and 8.1 so that the pneumatic used is 12 mm in diameter and the workload is 8 bar. The microcontroller is connected with a relay to control the flow of electricity to the solenoid valve to receive air from the air tank and will be forwarded to the pneumatic. A solenoid valve circulates air to actuate a pneumatic piston so that the ANOA 2 6x6 special vehicle windshield glass plate can open and close using a switch.
Keywords: Automatic, Arduino ATmega328, Anoa 2 6x6 Special Vehicle

---

Ketersediaan

Informasi Detail

Judul Seri

-

No. Panggil

1607115967

Penerbit

Pekanbaru : Universitas Riau – Fakultas Teknik – Teknik Mesin., 2023

Deskripsi Fisik

-

Bahasa

Indonesia

ISBN/ISSN

-

Klasifikasi

1607115967

Tipe Isi

-

Tipe Media

-

Tipe Pembawa

-

Edisi

-

Subjek

TEKNIK MESIN

Info Detail Spesifik

-

Pernyataan Tanggungjawab

DAUS

Versi lain/terkait

Lampiran Berkas

Komentar

---

Anda harus masuk sebelum memberikan komentar