CD Skripsi
Analisis Rancang Bangun Pembangkit Listrik Dengan Mesin Sepeda Motor Dengan Penggerak Mula Terkendali
Utilization of DC motors for moving the mechanical drivein place of thegas starter (prime mover). Which controlled by acontroller toregulate the movement of the voltage controlled DC motor power window. Change of generator output voltage will read the sensor voltage Vout generator converted toa voltage whichin this Vdc. Voltage read ATMEGA 8 Mickrokontroler IC by using the ADC will determine the movement of the motoras the controller of gas, if the voltageis less than 220 V to its minimum voltage of the motor which has coupledon gasprime mover swill rotate clock wise so the motor is pulling gas to reach the expected speed of the generator and its reversein case of over speed which causes mores tress then the generator will rotateanti-clockwiseso that the gas will dropto adjust the speed generator. So, rotation of DC motors for war dan drever seandata predetermined voltage levelis normal voltage 220-230V motor willstop, and will hold the gasengine driving the generator speed will be maintained solong as the voltage under normal conditions 220-230 V. Key words: DC Motor, DCMotor Driver, microcontroller ATMEGA 8, Vdc Power Supply.
Tidak tersedia versi lain