Digilib Perpustakaan Universitas Riau

Tugas Akhir, Skripsi, Tesis dan Disertasi Mahasiswa Universitas Riau

  • Beranda
  • Informasi
  • Berita
  • Bantuan
  • Pustakawan
  • Pilih Bahasa :
    Bahasa Arab Bahasa Bengal Bahasa Brazil Portugis Bahasa Inggris Bahasa Spanyol Bahasa Jerman Bahasa Indonesia Bahasa Jepang Bahasa Melayu Bahasa Persia Bahasa Rusia Bahasa Thailand Bahasa Turki Bahasa Urdu

Pencarian berdasarkan :

SEMUA Pengarang Subjek ISBN/ISSN Pencarian Spesifik

Pencarian terakhir:

{{tmpObj[k].text}}
Image of Analisis Pengaruh Kecepatan Thickener Terhadap Konsistensi Broke Dan Arus Listrik Yang Digunakan Thickener Pada Paper Machine #2
Penanda Bagikan

CD Tugas Akhir

Analisis Pengaruh Kecepatan Thickener Terhadap Konsistensi Broke Dan Arus Listrik Yang Digunakan Thickener Pada Paper Machine #2

Edang Syahputra / 2007025689 - Nama Orang;

ABSTRACT
Broke System is one of the important materials in paper making. Broke is a fiber
obtained from a sheet of paper obtained from a process on a paper machine. This
fiber is called secondary fiber, because broke is a source of fiber obtained from
recycled reject paper. Apart from paper breaks, broke can also be obtained from
paper trim (even distribution of paper edges). Broke is divided into two types,
namely wet broke and dry broke. Wet broke is a broke that comes from sheets of
paper that are still wet. Dry Broke is a broken that has less water content (you
could say it's close to dry) and has a sheet shape. Therefore this sheet needs to be
decomposed first to get back the fiber using Hydropulper. Before using broker,
broker must go through a thickener process first. Thickener is a stock thickening
process by removing water, where the broke enters the drum through the feed and
then the drum rotates at a certain speed so that the water comes out through the
wire mesh in the drum while the broke is left inside the surface of the drum. Broke
in thickener so that the consistency of the broken is uniform so you will get good
quality paper. This report contains the effect of speed thickener on the broken
consistency and the electric current used in the thickener. Observation results of
the final project obtained through 2 tests, if the speed thickener increases, the
broken consistency will also increase and the electric current used by the
thickener will also increase. 5 - 4rpm.
Keywords : electric current, broken, consistency, speed, thickener


Ketersediaan
#
Perpustakaan Universitas Riau 2007025689
2007025689
Tersedia
Informasi Detail
Judul Seri
-
No. Panggil
2007025689
Penerbit
Pekanbaru : Universitas Riau – Fakultas Teknik – TEKNOLOGI PULP DAN KERTAS., 2023
Deskripsi Fisik
-
Bahasa
Indonesia
ISBN/ISSN
-
Klasifikasi
2007025689
Tipe Isi
-
Tipe Media
-
Tipe Pembawa
-
Edisi
-
Subjek
TEKNIK KIMIA
Info Detail Spesifik
-
Pernyataan Tanggungjawab
DAUS
Versi lain/terkait

Tidak tersedia versi lain

Lampiran Berkas
  • COVER
  • DAFTAR ISI
  • ABSTRAK
  • BAB I PENDAHULUAN
  • BAB II TINJAUAN PUSTAKA
  • BAB III METODE PENELITIAN
  • BAB IV HASIL DAN PEMBAHASAN
  • BAB V KESIMPULAN DAN SARAN
  • DAFTAR PUSTAKA
Komentar

Anda harus masuk sebelum memberikan komentar

Digilib Perpustakaan Universitas Riau
  • Informasi
  • Layanan
  • Pustakawan
  • Area Anggota

Tentang Kami

As a complete Library Management System, SLiMS (Senayan Library Management System) has many features that will help libraries and librarians to do their job easily and quickly. Follow this link to show some features provided by SLiMS.

Cari

masukkan satu atau lebih kata kunci dari judul, pengarang, atau subjek

Donasi untuk SLiMS Kontribusi untuk SLiMS?

© 2025 — Senayan Developer Community

Ditenagai oleh SLiMS
Pilih subjek yang menarik bagi Anda
  • Karya Umum
  • Filsafat
  • Agama
  • Ilmu-ilmu Sosial
  • Bahasa
  • Ilmu-ilmu Murni
  • Ilmu-ilmu Terapan
  • Kesenian, Hiburan, dan Olahraga
  • Kesusastraan
  • Geografi dan Sejarah
Icons made by Freepik from www.flaticon.com
Pencarian Spesifik
Kemana ingin Anda bagikan?