ABSTRACT GHG emissions will continue to increase along with the increase in energy. The existence of the FT-UNRI has an impact on the environment as a result of the activities and various activities that occur in it. The amount of activity and activities carried out within the FT-UNRI will certainly affect the number of emissions that will be produced.Activities that produce CO2eq emission…
ABSTRACT One of the sources of clean water that is being used by humans is groundwater. The community in Belading Village, Sabak Auh District, Siak Regency uses well water which contains high iron (Fe) that need to be processed to reduce the Fe metal itself by adsorption using activated charcoal. Corn cobs are one of the potential agricultural wastes that used as activated charcoal. Corn c…
ABSTRACT Riau is a source of water for peaty areas or generally shallow swamp areas with brown water, high levels of humic acid, organic matter and iron. This study aims to determine the effect of stirring speed and particle size of peat soil adsorbent on the efficiency of removing organic substances, metals (Fe) and pH in peat water. The experiment was carried out by adsorption with a con…
ABSTRACT Peat soil as an adsorbent in peat water treatment is located in Sabak Permai Village, Sabak Auh District, Siak Regency. This study aims to study the effect of mass variation and contact time of peat soil adsorbent on the efficiency of Fe, Mn and color removal in peat water. The experiment was carried out by adsorption at a speed of 125 rpm by varying the mass (5, 10, 15, 20 g/L) a…
ABSTRACT Geopolymer mortar is a material that has high SiO2 and Al2O3 content and has the potential to be used as a base for making geopolymer mortar. This study aims to make geopolymer-based mortar (POFA) and coal flyash with the addition of graphene, and variations in the addition of graphene to the mechanical and morphological properties of the geopolymer mortar. The preparation of the …
ABSTRACT Acrylonitrile is a liquid, colorless and soluble in a variety of organic solvents, such as ethanol, ether, acetone, isopropanol, ethyl acetate, carbon tetrachloride and benzene, only partially soluble in water, which is usually used as a precursor in the manufacture of accrylamide and acliric acid. Acrylonitrile is produced from the sohio process, by reacting ammonia, propylene an…
ABSTRACT Acrylonitrile has the potential to be used as an additive in the chemical industry including the manufacture of thermoplastics, adiponitrile for the nylon industry, acrylamide, resin, synthetic rubber, acrylic fibers for the acrylic fabric industry and ABS (Acrylonitrile Butadiene Styrene) resin for the manufacture of plastic goods. Acrylonitrile is produced by the Sohio process u…
ABSTRACT Hot rolled sheet (HRS) characteristics can be improved by adding additives in the asphalt to be used. An additive that has been developed in recent years is graphene nanosheets (GNSs). This study aims to analyze and determine the effect of increasing the concentration and weight ratio of GNSs on the characteristics of HRS. The research was carried out in several stages, starting w…
ABSTRACT The need for renewable energy increases with the number of business and process that require biogas and dimethyl ether as the raw material in the manufacturing process. Dimethyl ether is widely used as refregerant, propellant in aerosol products, solvent, and extraction agent. The main raw materials used in manufacture of dimethyl ether by indirect synthesis process is palm empty …
ABSTRACT Fatty alcohol is needed in various industries such as the perfume, cosmetics, pharmaceutical, food and beverage industries. The need for fatty alcohol continues to increase every year. The import of fatty alcohol has been carried out but the demand for fatty alcohol has not been met. this led to the establishment of a fatty alcohol factory with the main raw material being crude pa…
ABSTRACT In this study, nano-Fe0@CS were synthesized by hydrothermal method. Studied MB degradation process and find the best composition of the degradation process. The catalyst analized by X-Ray Diffraction (XRD), Field-Emission Scanning Electron Microscope (FESEM), and Surface Area Analyzer (SAA) with Brunnaeur Emmet Teller (BET) method for known the structurural, morphological, and ph…
ABSTRACT Benzene, toluene, and xylene (BTX) can be produced through the catalytic reforming process of naphtha. Indonesia's unmet demand for Benzene, toluene and xylene (BTX) is imported from other countries. Dehydrogenation of light paraffins to olefins is a rate limiting step. Once formed the olegomerization reaction of the high olefins becomes the large intermediate form, which rapidly …
ABSTRACT Products produced by PT RAPP are kraft pulp and dissolving pulp, which distinguishes them from the product is in the cooking process. Dissolving prehydrolysis pulp has an additional sequence in the cooking process, which is useful for overhauling the chemical structure of wood, especially lignin and hemicellulose, so that in the cooking and bleaching process, these chemical compo…
ABSTRACT Pentosane number is a number that shows low levels of hemicellulose, especially xylans found in dissolving pulp. Dissolving pulp is white pulp which has alpha cellulose and a high degree of brightness and has low extractive, hemicellulose, and ash content. At PT RAPP the pentosan data comes from the results of the Technical Department checking using the distillation method with a …
ABSTRACT Recausticizing is a green liquor processing unit into white liquor. White liquor is produced by reacting green liquor with lime (CaO). The amount of lime use is highly considered to save production costs. Green liquor produced in the recovery boiler has a sulfidity content of 32‒39%, this causes a difference in the amount of lime consumption used to produce white liquor. In this…
The ability of students in understanding the complex information and analyzing skills is classified as low grade, therefore a HOTS-based evaluation instrument is needed using media that is able to develop high thinking skills and increase the enthusiasm of students doing evaluations. The purpose of this study is producing an evaluation instrument based on HOTS using Quizizz on a valid thermoche…
This study aims to produce module approach based Science, Emvironment, Technology And Society on the subject of on ionic equilibrium and pH of buffer solutions .The method in this research is research and development using the 4D development model, which has four stages, namely define, design, development, and disseminate. Product validation is carried out by validator using a validation sheet.…
Development of Student Activity Worksheets (LKPD) Based on Multiple Representation on the subject of reaction rates is the development of teaching materials that prioritizes three levels of chemical representation, namely macroscopic, submicroscopic, and symbolic representations. This research aims to develop LKPD based on multiple representation learning models on the subject of reaction rates…
The objective of this research is to determine validity of the instrument four-tier multiple choice test based on aspects of language, concepts, and construction, determine characteristics of test instrument, find out students misconceptions, and determine responses of instrument four-tier multiple choice test. Type of research is R&D with an ADDIE development model. This research was carried o…
The role of technology in education is very important for helping to achieve learning goals, especially during a pandemic like now. This research aims to develop teaching materials in the form of an interactive electronic module or e-Module on the colligative properties of solutions using Sigil. The output of Sigil's products has an ePub format that is easily accessible both offline and online.…