CD Skripsi

Rancang Bangun Sistem Pengontrolan Pendeteksi Volume Cairan Infus Menggunakan Smartphone Android Berbasis Blynk

---

Infusion is a medical device used to replace fluids lost from the body under certain
conditions. Sometimes medical personnel forget to change infusion fluids, resulting
in delays in infusion fluid replacement due to time and energy limitations which can
worsen the patient's condition. Based on these problems, in this study a device was
designed that can provide information on the patient's infusion fluid volume and
send notifications if the infusion fluid is running low. This tool uses a load cell
sensor to read the volume of infusion fluid that is installed. The HX711 acts as a
load cell output amplifier and converts analog signals to digital. NodeMCU
ESP8266 as a place for data processing, sending result data and notification of
infusion fluid volume in the range of 50 ml - 20 ml and below 20 ml which has been
processed to the blynk application. This tool has an error difference of 0.00436%
with a comparison scale of 100 grams - 500 grams and produces an output voltage
of 0.27 mV at a load of 100 grams and 0.55 mV at a load of 500. The test results
for sending notifications of blynk have succeeded in sending notifications 100 times
on blynk and the results of testing tools at Annisa Hospital Pekanbaru with 10
patients having an average number of hours of testing 9 hours 6 minutes.
Keywords : infusion, load cell, HX711, NodeMCU, blynk

---

Ketersediaan

Informasi Detail

Judul Seri

-

No. Panggil

1807111161

Penerbit

Pekanbaru : Universitas Riau – FAKULITAS TEKNIK – TEKNIK ELEKTRO., 2022

Deskripsi Fisik

-

Bahasa

Indonesia

ISBN/ISSN

-

Klasifikasi

1807111161

Tipe Isi

-

Tipe Media

-

Tipe Pembawa

-

Edisi

-

Subjek

TEKNIK ELEKTRO

Info Detail Spesifik

-

Pernyataan Tanggungjawab

nadya

Versi lain/terkait

Lampiran Berkas

Komentar

---

Anda harus masuk sebelum memberikan komentar