CD Skripsi

Perancangan Alat Uji Keausan (Tribometer) Untuk Cylindrical Roller Thrust Bearing Menggunakan Metode Pahl And Beitz

---

ABSTRACT
The design of this test equipment aims to determine the best design and bill of material of the tribometer for cylindrical roller thrust bearings, namely bearings that are suitable for large axial loads compared to radial loads. The working principle of this tribometer is that the cylindrical roller thrust bearing components will rotate and then be given an axial load so that they experience friction, with the friction on the bearings the wear and tear will be known. The Pahl and Beitz design method was applied to this study in order to obtain the best design results, where there are four working steps of this method, namely detailed design, embodiment design, product concept design, and planning and task explanation. The wear and tear that occurs in a material is caused by the presence of several different mechanisms and is formed by several parameters that vary including material, environment, operating conditions, and surface geometry of the object that wear occurs. The benefits of this tribometer are to determine the performance of the bearings and can also determine the effect of using lubricants on bearings. And with this tribometer it will be a reference in the selection of bearings.
Keywords : Design, Pahl and Beitz,Tribometer, Cylindrical roller thrust bearing
\

---

Ketersediaan

Informasi Detail

Judul Seri

-

No. Panggil

1607116128

Penerbit

Pekanbaru : Universitas Riau – Fakultas Teknik – Teknik Mesin., 2023

Deskripsi Fisik

-

Bahasa

Indonesia

ISBN/ISSN

-

Klasifikasi

1607116128

Tipe Isi

-

Tipe Media

-

Tipe Pembawa

-

Edisi

-

Subjek

TEKNIK MESIN

Info Detail Spesifik

-

Pernyataan Tanggungjawab

DAUS

Versi lain/terkait

Lampiran Berkas

Komentar

---

Anda harus masuk sebelum memberikan komentar