CD Tugas Akhir

Rancang Bangun Charger BateraiKontroler Berbasis MikrokontrolerAtmega 8535

---

Alternative electrical energy supply system can be done by saving energy electricity grid during
normal operation. One of the electrical energy storage medium is a battery. Electrical energy
PLN alternating current is converted into direct current electricity corresponding to the battery
voltage via the AC to DC charger circuit.
To maintain the quality of the battery that is not easily damaged done automatically supply
power, ie the charging current to be cut off when the battery is fully charged and connected
when an empty battery condition. This switch arrangement uses a microcontroller ATMega 8535
as a control relay, to disconnect or connect a power source voltage parameters are read by the
voltage sensor. The minimum voltage limit of sources in order to supply the load for sebasar
26.4 VDC battery. Testing the voltage sensors have been successful measure the voltage on the
battery. A tool created have successfully make the shift switch on a source to supply the load
automatically based on the parameters of the applied voltage microcontroller to be able to
connect the source to the load.
Keywords : Microcontroller ATMega 8535, voltage sensor, relay.
ix

---

Ketersediaan

Informasi Detail

Judul Seri

-

No. Panggil

07 04. 016 (0008)

Penerbit

Pekanbaru : Universitas Riau – Fakultas Teknik – Elektro., 2016

Deskripsi Fisik

xv, 40 hlm.; ill.; 29 cm

Bahasa

Indonesia

ISBN/ISSN

-

Klasifikasi

07 04. 016 (0008)

Tipe Isi

-

Tipe Media

-

Tipe Pembawa

-

Edisi

-

Subjek

ELEKTRO D III

Info Detail Spesifik

-

Pernyataan Tanggungjawab

DAUS

Versi lain/terkait

Lampiran Berkas

Komentar

---

Anda harus masuk sebelum memberikan komentar