CD Tugas Akhir

Rancang Bangun Alat Ukur Temperatur Menggunakan Sensor Rtd (Resistance Temperature Detector)

---

In this Final Project the author discusses the problem entitled "Designing a Temperature Measurement Tool Using a PT100 Sensor (Resistance Temperature Detector)". To adjust the temperature of the room, a device is needed that can adjust the temperature of the room. So in this case a room temperature measuring device is made, with a case study Designing a Temperature Measurement Tool Using a PT100 Sensor (Resistance Temperature Detector) ". While Arduino is a signal controller and processor, and a Liquid Crystal Display (LCD) with 16x2 character functions for the data viewer. PT100 is a sensor that can detect room temperature. This tool works automatically by responding to changes in temperature detected by the PT100 sensor. Then Arduino processes the temperature and provides a pre-programmed output. The measurement results are then displayed on the LCD. This tool obtains a temperature difference between the LCD that is read at the actual room temperature using a digital thermometer ranging from 0.04 ° C to 1.25 ° C.
Keywords: Temperature, PT100 sensor, whestone bridge, AD620, Arduino and LCD

---

Ketersediaan

Informasi Detail

Judul Seri

-

No. Panggil

07 04. 019 (0007)

Penerbit

Pekanbaru : Universitas Riau – Fakults Teknik – Teknik Elektro., 2019

Deskripsi Fisik

vi, 71 hlm.; ill.; 29 cm

Bahasa

Indonesia

ISBN/ISSN

-

Klasifikasi

07 04. 019 (0007)

Tipe Isi

-

Tipe Media

-

Tipe Pembawa

-

Edisi

-

Subjek

ELEKTRO

Info Detail Spesifik

-

Pernyataan Tanggungjawab

-

Versi lain/terkait

Lampiran Berkas

Komentar

---

Anda harus masuk sebelum memberikan komentar