CD Skripsi

Efektivitas Perekat Pada Laminasi Lambung Kapal Kayu

---

ABSTRACT
The research aims to determine the volume of adhesive needed in laminating wooden ships to produce the maximum strength of the ship structure with the adhesive 2used c'ketz reinforce bond. The method used in this study is an experimental method by testing directly in a laboratory with 4 levels, namely the dose of 0 ml (without treatment), 100 ml, 150 ml, 200 ml per wood laminate with as many as 5 repetitions at each level. Data analysis used analysis of variance (Analysis of Variance) with a completely randomized design mathematical model (CRD).
The results of the study that the modulus of elasticity (MOE) of the treatment of 0 ml (control), 100 ml, 150 ml, and 200 ml respectively was 32597.36 kg/cm2, 35401.03 kg/cm2, 40939.67 kg/cm2, and 46768.81 kg/cm2 and the laminated Modulus of Repture treatment of 0 ml, 100 ml, 150 ml and 200 ml respectively with 648.5823 kg/cm2, 666.5167 kg/cm2, 731.8859 kg/cm2 and 770,6981 kg / cm2. So that the adhesive volume needed in the lamination of wooden ships to produce the maximum structural strength of the ship is the adhesive volume of 200 ml and to determine the adhesive requirements needed for laminate of the hull on the immersed part in the water it can be calculated using the formula: Adhesive Requirement (l) = 3,3333 x, where x is a large WSA.

Keywords: ship, adhesive, reinforce bond, Modulus of Elasticity, Modulus of Repture

---

Ketersediaan

Informasi Detail

Judul Seri

-

No. Panggil

04 05. 119 (0083)

Penerbit

Pekanbaru : Universitas Riau – Fakultas Perikanan Dan Ilmu Kelautan - Pemanfaatan Sumber Daya Perikanan., 2019

Deskripsi Fisik

xv, 52 hlm.; ill.; 29 cm

Bahasa

Indonesia

ISBN/ISSN

-

Klasifikasi

04 05. 119 (0083)

Tipe Isi

-

Tipe Media

-

Tipe Pembawa

-

Edisi

-

Subjek

PEMANFAATAN SUMBERDAYA PERIKANAN

Info Detail Spesifik

-

Pernyataan Tanggungjawab

DAUS

Versi lain/terkait

Lampiran Berkas

Komentar

---

Anda harus masuk sebelum memberikan komentar