CD Skripsi

Pemodelan 3 Dimensi Dermaga Pelabuhan Perikanan Nusantara Sibolga Dengan Menggunakan Sap2000

---

ABSTRACT
This research was conducted on April 29th until May 13th 2019 at the Sibolga Archipelago Fisheries Port. The method used is a survey method. The purpose of this study was to determine the shear forces and force moments experienced by the 3D model of the Sibolga Archipelago Fishery Harbor wharf when it was loaded using the SAP2000 application. From the value of the shear force and moment of force, the average pile structure condition is damaged or broken (colored red). Broken piles caused by workloads given to the model of the structure of the pier building, giving workloads resulted in the pier model experiencing shear force and moment of force, the largest load given is the nominal base shear load due to earthquake on the x and y axis. Using SAP2000 application there are two colors on the pile namely blue and red, blue indicates the structure is very strong while the red color shows broken structures. So we get the conclusion that the pile has a limit to the shear force (P, V2, V3) and moment of force (T, M2, M3).
Keywords: Jetty, Modeling, Loading, SAP2000

---

Ketersediaan

Informasi Detail

Judul Seri

-

No. Panggil

04 05. 119 (0085)

Penerbit

Pekanbaru : Universitas Riau – Fakultas Perikanan Dan Ilmu Kelautan - Pemanfaatan Sumber Daya Perikanan., 2019

Deskripsi Fisik

xi, 71 hlm.; ill.; 29 cm

Bahasa

Indonesia

ISBN/ISSN

-

Klasifikasi

04 05. 119 (0085)

Tipe Isi

-

Tipe Media

-

Tipe Pembawa

-

Edisi

-

Subjek

PEMANFAATAN SUMBERDAYA PERIKANAN

Info Detail Spesifik

-

Pernyataan Tanggungjawab

DAUS

Versi lain/terkait

Lampiran Berkas

Komentar

---

Anda harus masuk sebelum memberikan komentar