CD Skripsi

Rancang Bangun Turbin Angin Sumbu Horizontal Dengan Tipe Bilah Inverse Taper Berkapasitas 300 Watt Berdasarkan Kecepatan Angin Di Pekanbaru

---

Overcome the use of fossil fuel based power plants is improving annually and waste in Indonesia palm that cannot be used again, it is the basis for this research through the planning and manufacturing of wind turbine blades of elementary substance composite fibers of empty palm. The wind turbine blades designed adjusted on the basis of wind in Pekanbaru. Blades designed with type inverse tapers total of 5. As for type of airfoil used is NACA 4415 with increasing chord thickness percentage by 30%. The result of calculation, obtained radius blade 1,1m and hub 0,2m. Wide on the base of blades 0,22m and the end 0,37m. To make easier for validation design, used aerodynamic Qblade simulation. Application of Autodesk Inventor used to facilitate modeling design. The composite made hollow structure to obtain blades the weight of a light. In making, used method of hand lay-up and vacuum bagging. The fibre of empty palm is given alkaline treatment with 3% NaOH rate of 2 hours. Composites made with 5% fiber content of epoxy resin with length of fiber used is 30mm. From results, Blade will generate maximum power of 69,29W with rotor rotation speed of 50,9rpm at wind speeds of 6,33m/s.
Keywords: Airfoil, Inverse Taper, Fibre Bunch of Empty Palm

---

Ketersediaan

Informasi Detail

Judul Seri

-

No. Panggil

07 03. 120 (0015)

Penerbit

Pekanbaru : Universitas Riau – Fakultas Teknik – Teknik Mesin., 2020

Deskripsi Fisik

xi, 71 hlm.; ill.; 29 cm

Bahasa

Indonesia

ISBN/ISSN

-

Klasifikasi

07 03. 120 (0015)

Tipe Isi

-

Tipe Media

-

Tipe Pembawa

-

Edisi

-

Subjek

MESIN

Info Detail Spesifik

-

Pernyataan Tanggungjawab

DAUS

Versi lain/terkait

Lampiran Berkas

Komentar

---

Anda harus masuk sebelum memberikan komentar