Digilib Perpustakaan Universitas Riau

Tugas Akhir, Skripsi, Tesis dan Disertasi Mahasiswa Universitas Riau

  • Beranda
  • Informasi
  • Berita
  • Bantuan
  • Pustakawan
  • Pilih Bahasa :
    Bahasa Arab Bahasa Bengal Bahasa Brazil Portugis Bahasa Inggris Bahasa Spanyol Bahasa Jerman Bahasa Indonesia Bahasa Jepang Bahasa Melayu Bahasa Persia Bahasa Rusia Bahasa Thailand Bahasa Turki Bahasa Urdu

Pencarian berdasarkan :

SEMUA Pengarang Subjek ISBN/ISSN Pencarian Spesifik

Pencarian terakhir:

{{tmpObj[k].text}}
Image of Pengaruh penambahan superplasticizer sikament NN terhadap kuat tekan beton dan workability dengan nilai slump sebesar 10 cm
Penanda Bagikan

CD Tugas Akhir

Pengaruh penambahan superplasticizer sikament NN terhadap kuat tekan beton dan workability dengan nilai slump sebesar 10 cm

Rommel Budiman Napitupul / 1607036677 - Nama Orang;

Concrete is the material most widely used in construction in the field of civil
engineering, both in buildings, bridges, dams and other constructions. Improving
the quality of concrete can be done by adding added materials or commonly called
Admixture and Additives which can help maintain the quality and workability of
the concrete and accelerate hardening. High quality concrete planning is
inseparable from determining Factor of Cement Water (FCW). Advances in
concrete technology have resulted in added material (admixture). This research
was conducted to determine the effect of maximum compressive strength and
workability on concrete added by Sikament-NN at a dose of 0.4%; 0.8%; 1.0%;
1.2%; 1.4%; 1.8%; from the weight of cement in the FCW variation but on the
slump value target is 10 ± 2 cm. Maximum compressive strength value with the
addition of the optimal Sikament NN dose was generated at a percentage of 1.6%
of fc '42.51 MPa with a correction FCW of 0.32 and a slump value of 12 cm.
Keywords: Concrete, slump value, Sikament NN, Factor of Cement Water Value


Ketersediaan
#
Perpustakaan Universitas Riau 07 01. 020 (0008)
07 01. 020 (0008)
Tersedia
Informasi Detail
Judul Seri
-
No. Panggil
07 01. 020 (0008)
Penerbit
Pekanbaru : Universitas Riau – Fakultas Teknik - Sipil., 2020
Deskripsi Fisik
xii, 52 hlm.; ill.; 29 cm
Bahasa
Indonesia
ISBN/ISSN
-
Klasifikasi
07 01. 020 (0008)
Tipe Isi
-
Tipe Media
-
Tipe Pembawa
-
Edisi
-
Subjek
SIPIL
Info Detail Spesifik
-
Pernyataan Tanggungjawab
Deni
Versi lain/terkait

Tidak tersedia versi lain

Lampiran Berkas
  • COVER
  • DAFTAR ISI
  • ABSTRAK
  • BAB I PENDAHULUAN
  • BAB II LANDASAN TEORI
  • BAB III METODOLOGI PENELITIAN
  • BAB IV HASIL DAN PEMBAHASAN
  • BAB V KESIMPULAN DAN SARAN
  • DAFTAR PUSTAKA
  • LAMPIRAN
Komentar

Anda harus masuk sebelum memberikan komentar

Digilib Perpustakaan Universitas Riau
  • Informasi
  • Layanan
  • Pustakawan
  • Area Anggota

Tentang Kami

As a complete Library Management System, SLiMS (Senayan Library Management System) has many features that will help libraries and librarians to do their job easily and quickly. Follow this link to show some features provided by SLiMS.

Cari

masukkan satu atau lebih kata kunci dari judul, pengarang, atau subjek

Donasi untuk SLiMS Kontribusi untuk SLiMS?

© 2025 — Senayan Developer Community

Ditenagai oleh SLiMS
Pilih subjek yang menarik bagi Anda
  • Karya Umum
  • Filsafat
  • Agama
  • Ilmu-ilmu Sosial
  • Bahasa
  • Ilmu-ilmu Murni
  • Ilmu-ilmu Terapan
  • Kesenian, Hiburan, dan Olahraga
  • Kesusastraan
  • Geografi dan Sejarah
Icons made by Freepik from www.flaticon.com
Pencarian Spesifik
Kemana ingin Anda bagikan?