CD Tugas Akhir

Pemanfaatan Limbah Casing Printer Sebagai Material Pengganti Sebagian Pasir Pada Pembuatan Batako

---

E-waste as printer casing is plastic that resistant to chemicals, stable to heat, strength
and gristly. One of the efforts to reduce e-waste is to utilize it as a brick for building
materials. The purpose of this research is to use the casing of printer waste as substitute
for some sand on the Production of bricks, to determine the influence of variation in the
refined printer chasing on dry weight, compressive strength and absorption power of
bricks against water, and comparing the quality of the bricks made with the bricks
according to SNI 03-0349-1989. Cement was mixed with water, sand and addition of ewaste
based on its variation. After that it was molded, then the brick was dried for 28
day. Variations in the amount of printer casing 0,06 kg, 0,12 kg, 0,18 kg, 0,24 kg, 0,30 kg,
0,36 kg and without the use of electronic waste. Result, its found that mutu I brick
production was in variation of the amount of e-waste 0.36 kg with dry weight of 7,75kg,
absorption power of 0,51%, and compressive strength of 135,62 kg/cm2 that fulfilling SNI
standards 03-0349-1989.
Keywords: absorption power, bricks, compressive strength, dry weight, e-waste

---

Ketersediaan

Informasi Detail

Judul Seri

-

No. Panggil

07 02. 020 (0010)

Penerbit

Pekanbaru : Universitas Riau – Fakultas Kimia – Teknik Kimia., 2020

Deskripsi Fisik

ix, 232 hlm.; ill.: 29 cm

Bahasa

Indonesia

ISBN/ISSN

-

Klasifikasi

07 02. 020 (0010)

Tipe Isi

-

Tipe Media

-

Tipe Pembawa

-

Edisi

-

Subjek

TEKNIK KIMIA

Info Detail Spesifik

-

Pernyataan Tanggungjawab

Daus

Versi lain/terkait

Lampiran Berkas

Komentar

---

Anda harus masuk sebelum memberikan komentar