CD Skripsi

Rancang Bangun Data Logger Kecepatan Angin Untuk 4 Level Ketinggian Berbasis Arduino

---

ABSTRACT
Wind energy is one of the renewable energy sources that can be used as a
power plant to meet the needs of electrical energy in an area. The potential for wind
energy in an area can be determined based on the wind speed. Each area has
varying wind speeds, depending on the shape of the wind trajectory and the
obstacles in the area. Therefore, information about wind speed is needed to see the
potential for wind energy in an area. This study tries to design a tool that can record
wind speed (data logger) with 4 variations based on the Arduino microcontroller,
where the measurement results from the tool will be stored on the SD Card.
Measurement of wind speed with altitude variations aims to see the level at which
wind energy can be utilized. This research was conducted in the Riau University
area, starting on March 30 - April 5, 2021. The average percentage of errors in
reading the final anemometer was 3% compared to reading the standard
anemometer. The results of measurements in the Riau University area found that
the highest average wind speed was 1.80 m/s. While the maximum wind speed
during the study was 6.51 m/s. The highest wind energy potential occurs on Friday
with a power of 11.02 W and wind energy of 140.25 Wattday.
Keywords: Energy, wind speed, anemometer, data logger

---

Ketersediaan

Informasi Detail

Judul Seri

-

No. Panggil

07 04. 121 (0104)

Penerbit

Pekanbaru : Universitas Riau –Fakultas Teknik – Teknik elektro., 2021

Deskripsi Fisik

xii, 29 hlm.; ill.: 29 cm

Bahasa

Indonesia

ISBN/ISSN

-

Klasifikasi

07 04. 121 (0104)

Tipe Isi

-

Tipe Media

-

Tipe Pembawa

-

Edisi

-

Subjek

TEKNIK ELEKTRO

Info Detail Spesifik

-

Pernyataan Tanggungjawab

Daus

Versi lain/terkait

Lampiran Berkas

Komentar

---

Anda harus masuk sebelum memberikan komentar