CD Skripsi
Produktivitas Kegiatan Debarking Dengan Penggunaan Debark Ponton Darat Di Pt Rapp Estate Pelalawan
ABSTRACT
Debarking Debarking is a critical stage in timber harvesting and processing
because it directly affects raw material quality and the efficiency of subsequent
operations. At PT Riau Andalan Pulp and Paper (RAPP), Pelalawan Estate, the
implementation of Land-Based Debarking Pontons (DPD) has been developed to
improve the productivity and efficiency of debarking activities. This study aims to
compare the productivity and efficiency of the dip method and the direct Field
observations were carried out over 15 work cycles for each method. The observed
parameters included the number of logs per cycle, production volume per cycle,
working time, and equipment productivity. The results were then compared with
the company productivity standard of 10.82 m³/hour to determine efficiency l, The
results indicate that the dip method achieved an average cycle time of 5.06
minutes, with a productivity of 0.23 m³/minute and an efficiency of 128% relative
to the company standard. In comparison, the direct method demonstrated superior
performance, with a shorter average cycle time of 4.06 minutes, a higher
productivity of 0.399 m³/minute, and an efficiency level of 221%, nearly twice
that of the dip method. These findings suggest that the direct method is more
suitable for operational conditions that require high speed and large production
volumes. However, the dip method remains effective for logs with thicker bark or
under specific field conditions that require preliminary treatment to facilitate
debarking. Overall, the use of Land-Based Debarking Pontons (DPD)
significantly enhances the productivity and efficiency of the debarking process at
PT RAPP. The complementary application of both methods allows greater
operational flexibility, supports the achievement of national pulp production
targets, reduces reliance on manual labor, and improves debarking quality
Keywords: debarking, efficiency, harvesting, productivity, Industrial Forest
Plantation.
vii
BIMA DANU SATRIA. NIM 2106111200.
Produktivitas Kegiatan Debarking Dengan Penggunaan Debark Ponton Darat Di
PT. RAPP Estate Pelalawan
RINGKASAN
Kegiatan debarking atau pengupasan kulit kayu merupakan salah satu tahapan
penting dalam pemanenan dan pengolahan kayu karena berpengaruh terhadap
kualitas bahan baku dan efisiensi proses lanjutan. Pada kondisi lapangan di PT
Riau Andalan Pulp and Paper (RAPP) Estate Pelalawan, telah dikembangkan
penggunaan Debark Ponton Darat (DPD) untuk meningkatkan produktivitas dan
efisiensi kegiatan debarking.
Penelitian ini bertujuan untuk mengukur produktivitas dan efisiensi antara
metode celup dan metode langsung pada proses debarking menggunakan DPD
dalam meningkatkan produktivitas Perusahaan. Pengumpulan data dilakukan
melalui pengamatan lapangan pada 15 siklus kerja masing-masing metode.
Parameter yang diamati meliputi jumlah kayu per siklus, volume produksi per
siklus, waktu kerja, dan produktivitas alat. Hasil pengukuran kemudian
dibandingkan dengan standar perusahaan (10,82 m³/jam) untuk menilai tingkat
efisiensi.
Hasil penelitian menunjukkan bahwa metode celup memiliki rata-rata waktu
siklus 5,06 menit dengan produktivitas 0,23 m³/menit dan efisiensi 128%
dibanding standar perusahaan, sedangkan metode langsung memiliki waktu siklus
lebih singkat (4,06 menit) dengan produktivitas 0,399 m³/menit dan efisiensi
221%, hampir dua kali lipat metode celup. Perbedaan ini menunjukkan bahwa
metode langsung lebih sesuai untuk kondisi operasional yang menuntut kecepatan
dan volume produksi tinggi, sedangkan metode celup tetap bermanfaat untuk kayu
dengan kulit lebih tebal atau kondisi tertentu. Secara keseluruhan, penelitian ini
menyimpulkan bahwa penggunaan Debark Ponton Darat (DPD) mampu
meningkatkan produktivitas dan efisiensi proses debarking di PT RAPP.
K edua metode ini memiliki karakteristik yang berbeda namun keduanya
dapat saling
Tidak tersedia versi lain