CD Tugas Akhir

Modifikasi Dan Pembuatan Burner Menggunakan Sistem Helical Coil Berbahan Bakar Oli Bekas Dan Minyak Jelantah

---

The increasing dependence on fossil fuels and the environmental problems caused
by waste oil, which is classified as hazardous and toxic waste (B3), have encouraged
the need for innovations in environmentally friendly alternative energy utilization.
This final project aims to design, manufacture, and modify a waste-oil- fueled
burner integrated with a helical coil system as a fuel preheating mechanism, as well
as to evaluate the combustion temperature achieved by the system.The fabrication
process consisted of cutting, drilling, and welding the main components, including
the frame, fuel tank, furnace, nozzle, and helical coil. The testing procedure was
conducted for 30 minutes with temperature measurements taken at 3-minute
intervals using three temperature measurement points (T1, T2, and T3). The test
results showed that the highest temperatures were obtained at the 15th minute, with
T1 reaching 84°C, T2 reaching 149°C, and T3 reaching 180°C, while the highest
average temperature was achieved at the 6th minute with a value of 139°C. The heat
distribution at measurement point T3 tended to be the highest due to its closer
position to the center of combustion. Overall, the waste-oil-fueled burner integrated
with a helical coil system was proven capable of operating independently without
relying on an electrical power source and produced a relatively stable flame.
Therefore, it can be considered an alternative heat energy source as well as a
practical solution for the utilization of waste oil in the community.
Keywords: Shredding machine, organic waste, shaft, blades, vertical cylindrical
drum type

---

Ketersediaan

Informasi Detail

Judul Seri

-

No. Panggil

2207025612

Penerbit

Pekanbaru : Universitas Riau – F.TEKNIK - D-III Teknik MESIN., 2026

Deskripsi Fisik

-

Bahasa

Indonesia

ISBN/ISSN

-

Klasifikasi

2207025612

Tipe Isi

-

Tipe Media

-

Tipe Pembawa

-

Edisi

-

Subjek

TEKNIK MESIN

Info Detail Spesifik

-

Pernyataan Tanggungjawab

daus

Versi lain/terkait

Lampiran Berkas

Komentar

---

Anda harus masuk sebelum memberikan komentar