CD Skripsi

Rancang Bangun Saklar Pemindah Otomatis Berpenggerak Motor Stepper Variable Reluctance Dengan Pengendali Mikrokontroler Atmega8535

---

Electricity supply from PLN network is not always continually available, there could be a blackout at any time. To anticipate such outages, it is necessary to design an automatic transfer switch between the main power source and the backup power. Therefore, it is necessary to develop the automatic transfer switch equipment, where mechanically formed by cam-switch which is driven directly by variable reluctance stepper motor with microcontroller ATMega8535. Automatic mode of operation is determined by stepper motor controlled by microcontroller ATMega8535 while manual mode is done by using grip handle attached to the rotor axis of variable reluctance stepper motor. The determination electricity supply of genset and PLN conditions is determined tolerance of ± 5% from 220 VAC standard voltage of PLN, this condition becomes the basis for moving the stepper variable reluctance motor with the angle-step position -300 for the supply of PLN (I) and +300 angle for genset (II) to move cam-switch to supply the load. The testing design has done with the following result i.e. the variable reluctance stepper motor will rotate if fullfilled the 5% of tolerance to achieve for the uninterruptible load supply. The transition will take affect within ±8 s.
Keywords: Automatic transfer switch, Microcontroller ATMega8535, Variable reluctance stepper motor.

---

Ketersediaan

Informasi Detail

Judul Seri

-

No. Panggil

07 04. 117 (0051)

Penerbit

Pekanbaru : Universitas Riau – Fakultas Teknik – Elektro., 2017

Deskripsi Fisik

xvi, 60 hlm.; ill.; 29 cm

Bahasa

Indonesia

ISBN/ISSN

-

Klasifikasi

07 04. 117 (0051)

Tipe Isi

-

Tipe Media

-

Tipe Pembawa

-

Edisi

-

Subjek

ELEKTRO

Info Detail Spesifik

-

Pernyataan Tanggungjawab

DAUS

Versi lain/terkait

Lampiran Berkas

Komentar

---

Anda harus masuk sebelum memberikan komentar