CD Skripsi

Pengembangan Dinamometer Menggunakan Sensor Strain Gauge Dengan Tipe Batang Regang Four Rod Bar Untuk Mengukur Gaya Pemotongan Pada Mesin Bubut

---

This study aims to manufacture a dynamometer type four square plate that can measure tangential and axial force on lathe machine. The dynamometer consists of mechanical and electrical components. The mechanical components are designed and analyzed with a maximum force of 500 N using autodesk inventor 2015 software. Electrical components based on strain gauge sensors for reading strain on mechanical components and connected to HX 711 module as amplifier then forwarded to Arduino Uno to process data and display the results at LCD and the results can be stored on the data logger. For optimal results the dynamometer needs to be calibrated and determine the calibration factor. The machining parameters used during the dynamometer testing process are 445 rpm rotation, Feeding 0.11; 0.22; 0.33 mm / round and depth of cut 0.2; 0.3; 0.4 mm. The dimension of strain rod is ∅ 7 mm and length 40 mm. The highest value measurement dynamometer for tangential force is 306.9 N and axial force is 72.9 N
Keywords: Cutting Force, Strain Bar, Stress, Lathe Machine.

---

Ketersediaan

Informasi Detail

Judul Seri

-

No. Panggil

07 03. 118 (0019)

Penerbit

Pekanbaru : Universitas Riau – Fakultas Teknik – Teknik Mesin., 2018

Deskripsi Fisik

xvii, 74 hlm.; ill.; 29 cm

Bahasa

Indonesia

ISBN/ISSN

-

Klasifikasi

07 03. 118 (0019)

Tipe Isi

-

Tipe Media

-

Tipe Pembawa

-

Edisi

-

Subjek

MESIN

Info Detail Spesifik

-

Pernyataan Tanggungjawab

DAUS

Versi lain/terkait

Lampiran Berkas

Komentar

---

Anda harus masuk sebelum memberikan komentar