CD Skripsi

Pemanfaatan Limbah Plastik Dari Casing Printer Bekas Dengan Pra-Treatment 5% Naocl Dan 4% Naoh Sebagai Filler Dalam Pembuatan Batako Pejal

---

ABSTRACT
Research on the use of plastic waste has been carried out in recent years, but the weak adhesivity between the surface of the plastic and cement make a drastic reduction in compressive strength in the cement-plastic mixture. To overcome this problem, treatment is carried out on the plastic that has been chopped using 4% NaOCl and 5% NaOH to convert the polymeric hydrocarbon groups in the plastic into R-COOH which is more reactive to the cement material. In this research nine solid bricks are evaluated to study four ABS material composition using pra-treatment 4% NaOH and 5%NaOCl, and four without pra-treatment. Those four ABS material compositions total are 0,2; 0,4; 0,6; 0,8 kg. The results showed substitution of 0.8 kg ABS with treatment succeeded in reducing the dry weight of the block by 36% and increasing the compressive strength of the block by 36.25%. This shows the resulting brick has better quality than the brick without substitution.

Keywords: ABS substitution, acrylonitrile butadiene styrene, solid brick, recycled plastic

---

Ketersediaan

Informasi Detail

Judul Seri

-

No. Panggil

07 02. 119 (0178)

Penerbit

Pekanbaru : Universitas Riau – Fakultas Teknik – Teknik Kimia., 2019

Deskripsi Fisik

vi, 71 hlm.; ill.; 29 cm

Bahasa

Indonesia

ISBN/ISSN

-

Klasifikasi

07 02. 119 (0178)

Tipe Isi

-

Tipe Media

-

Tipe Pembawa

-

Edisi

-

Subjek

KIMIA

Info Detail Spesifik

-

Pernyataan Tanggungjawab

DAUS

Versi lain/terkait

Lampiran Berkas

Komentar

---

Anda harus masuk sebelum memberikan komentar