CD Tugas Akhir

Pembuatan Sistem Kontrol Mesin Cnc Hybrid 3 Axis

---

CNC machines are machine tools that can be operated automatically. Usually CNC machines can only do one machining process only, so it is considered less effective. Based on this, researchers did some research on tool machines that are able to perform two machining processes at once (CNC Hybrid). In the manufacture of CNC Hybrid, the one that should be considered is a machine control system that serves as the machine's brains in order to be operated automatically. The control system is done with the control system assembly in accordance with the schematic diagram that has been created. To avoid mistakes in machining process, the control system must be calibrated by calculating the difference in distance from the initial axis movement and the final movement distance of the Axis hybrid CNC machine. To operate a CNC machine, the G-Code program is used manually or with the program application. After testing is obtained the maximum yield difference of 2.1 mm. This is due to the selection of machining parameters such as feeding (F) and different dietary depths (a).
Keywords: CNC, Hybrid, control, calibration, G-code

---

Ketersediaan

Informasi Detail

Judul Seri

-

No. Panggil

07 03. 0120 (0011)

Penerbit

Pekanbaru : Universitas Riau – Fakultas Teknik – Teknik Mesin D III., 2020

Deskripsi Fisik

v, 52 hlm.; ill.; 29 cm

Bahasa

Indonesia

ISBN/ISSN

-

Klasifikasi

07 03. 0120 (0011)

Tipe Isi

-

Tipe Media

-

Tipe Pembawa

-

Edisi

-

Subjek

MESIN

Info Detail Spesifik

-

Pernyataan Tanggungjawab

DAUS

Versi lain/terkait

Lampiran Berkas

Komentar

---

Anda harus masuk sebelum memberikan komentar